Product No.: 330180-X1-00 143416-27 - General Introduction
This product is a high-performance, customized vibration transducer assembly (Kit), belonging to the specialized sensor family within industrial machinery monitoring systems. The code structure deciphers as follows:
330180: Base product family, typically representing industrial velocity transducers or low-frequency accelerometers for casing vibration.
-X1-00: Denotes a pre-defined special variant ("X1") of the standard product. This "X1" configuration usually specifies a unique combination of sensitivity, frequency response, and output type (e.g., a 4-20 mA loop-powered transmitter or a specific IEPE/ICP® current).
143416-27: This is the complete kit assembly number. The suffix "-27" is crucial and typically indicates a specific, pre-defined field mounting kit that includes not only the sensor but also all necessary accessories for installation, such as a magnetic mounting base, mounting stud, cable with a specific connector, and potentially a signal conditioner junction box.
This kit is designed for rapid, reliable, and standardized deployment of vibration monitoring points in the field, ensuring consistent installation quality and signal integrity.
Detailed Parameters
| Parameter Category | Specification | Details / Notes |
|---|---|---|
| Transducer Core Type | Custom-Configured Vibration Sensor (X1 Variant) | Likely a 4-20 mA loop-powered velocity transmitter or a high-sensitivity ICP® accelerometer, as defined by the "X1" code. |
| Sensitivity / Output | Defined by "X1" Configuration. • If transmitter: 4-20 mA output proportional to velocity (e.g., 0-1 in/s RMS = 4-20 mA). • If ICP®: Specific mV/g sensitivity (e.g., 500 mV/g). | The key performance parameter set by the custom order. Eliminates the need for external signal conditioners. |
| Frequency Range | Optimized per "X1" spec. For velocity: Typically 4.5 Hz to 1 kHz. For accelerometer: 0.5 Hz to 5 kHz (extended low frequency possible). | Tailored for monitoring common machinery frequencies (e.g., fan, pump, motor vibrations). |
| Mounting Interface | Integrated ¼-28 UNF or M10x1.0 threaded stud on sensor base. | Allows direct mounting or attachment to the accessories in the "-27" kit. |
| Kit Contents (-27) | Pre-assembled Field Installation Kit, likely includes: 1. Transducer (X1 configured) 2. Magnetic Mounting Base (with M10 or ¼-28 thread) 3. Integral Cable (5m or 10m standard length) 4. Connector (e.g., 3-pin MIL or quick-disconnect) or pigtail leads 5. Mounting hardware (stud, washers) 6. Carrying case. | The "-27" suffix ensures all compatible parts are supplied together for a specific installation method (magnetic/temporary or stud/permanent). |
| Housing Material | Stainless Steel (304/316). | Standard for corrosion resistance in industrial environments. |
| Cable Specification | Flexible, oil-resistant PUR (Polyurethane) jacketed cable, shielded. | Length and connector type are defined by the kit number 143416-27. |
| Operating Temperature | -40°C to +85°C (for electronics); up to +120°C for sensor housing. | Suitable for most industrial ambient conditions. |
| Power Requirement (if active) | • 4-20 mA Loop: 12-30 VDC loop power. • ICP®: 18-30 VDC, 2-20 mA constant current excitation. | |
| Weight (Sensor Only) | Approx. 300 - 500 grams. | |
| Weight (Complete Kit) | Approx. 1.8 - 3.5 kg (heavily dependent on cable length and inclusion of magnetic base). | The magnetic base adds significant weight. |
| Dimensions (Sensor) | Diameter: ~ 30-35 mm Height: ~ 70-90 mm. | Compact for easy mounting in tight spaces. |
| Key Feature | Plug-and-Play Field Kit with Special "X1" Performance. Provides a complete, ready-to-install solution with guaranteed performance (sensitivity, output), eliminating component mismatch and simplifying inventory. | |
| Primary Application | Quick-deployment predictive maintenance (PdM) routes and permanent monitoring on mid-critical assets. |
Primary Application Scenarios
This kit is ideal for applications requiring consistent, high-quality vibration data with minimal installation effort.
Plant-Wide Predictive Maintenance (PdM) Programs:
Portable/Temporary Monitoring Points: The included magnetic base allows technicians to quickly and securely attach the sensor to multiple assets (pumps, motors, fans) during monthly or quarterly data collection routes. The "X1" output ensures consistent scaling in the data collector.
Permanent Monitoring of Mid-Critical Machinery:
Pump, Fan, and Compressor Casing Vibration: Installed permanently (using the stud mount) on the bearing housings of critical but non-spared equipment in water treatment plants, HVAC systems, and manufacturing facilities. The 4-20 mA output (if X1 is a transmitter) feeds directly into the plant PLC/DCS for continuous monitoring.
OEM Equipment Integration:
Machine Builder's Standard Kit: An OEM of compressors, generators, or large pumps may specify this exact kit (143416-27) as their standard vibration monitoring accessory, ensuring every unit shipped has a consistent and pre-approved monitoring point.
Energy & Utilities:
Cooling Tower Fan & Induced Draft Fan Monitoring: The robust construction and kit format allow for reliable installation in outdoor, high-vibration environments to monitor fan imbalance and bearing health.
Troubleshooting & Special Testing Campaigns:
Engineering Investigations: Used for temporary, high-fidelity vibration measurements during root cause analysis of machine problems. The complete kit allows engineers to immediately instrument a machine without searching for compatible parts.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
