Product Introduction
The Bently Nevada 170133-050-00 is a high‑quality extension cable designed for use with 1700 series accelerometers and vibration monitors (e.g., 1701/06). It connects an IEPE (Integrated Electronics Piezo‑Electric) accelerometer or velocity sensor to a monitoring device, such as a 1700 series rack or a portable data collector. The cable features a robust, flexible jacket with excellent noise rejection, ensuring reliable transmission of dynamic vibration signals in industrial environments. The -050 suffix indicates a length of 5.0 meters (16.4 feet), and the -00 suffix denotes a standard configuration with no special approvals (suitable for general purpose, non‑hazardous areas). One end is typically fitted with a MIL‑C‑5015 style connector (or M8/M12 depending on variant) for sensor connection, and the other end with a BNC or SMA connector for the monitor.
Parameters
| Parameter | Specification |
|---|---|
| Model / Part Number | 170133-050-00 |
| Product Type | Extension cable for accelerometer / vibration sensor |
| Cable Length | 5.0 m (16.4 ft) |
| Connector Type (Sensor end) | MIL‑C‑5015 style (2‑pin) or M8 male (depending on order) |
| Connector Type (Monitor end) | BNC male (standard) or SMA |
| Impedance | 50 Ω (nominal) |
| Shielding | Braided copper + foil (dual shield) |
| Cable Outer Diameter | 4.2 mm (0.165 in) |
| Dimensions (length only) | 5.0 m overall length |
| Weight (approx.) | 0.25 kg (0.55 lb) |
| Operating Temperature | –40 °C to +125 °C (–40 °F to +257 °F) |
| Jacket Material | Polyurethane (PUR) – oil, chemical, and abrasion resistant |
| Minimum Bend Radius | 25 mm (1.0 in) |
| Capacitance | 90 pF/m (typical) |
| Approval Code | -00 (General purpose / safe area only) |
Application Scenarios
Extending Sensor Reach – Used when a vibration sensor (accelerometer) must be mounted farther from its monitor than the sensor’s built‑in pigtail cable allows. The 5.0 m length is ideal for medium‑distance runs in pump houses, compressor skids, or fan decks.
Connecting to 1700 Series Monitors – Links a 100 mV/g accelerometer to a 1701/06 vibration monitor, enabling continuous 4‑20 mA output and relay alarming for non‑critical machinery protection.
Portable Data Collection – Provides a convenient extension between a handheld data collector (e.g., CSI, Commtest) and a permanently mounted accelerometer on a motor, pump, or fan, allowing safe, remote measurement.
Temporary Test Setups – Used during commissioning or troubleshooting to connect test accelerometers to diagnostic instruments (oscilloscope, FFT analyzer) without permanent wiring.
General Industrial Environments – Suitable for steel mills, paper plants, food processing, and HVAC equipment where reliable, noise‑resistant signal transmission is required in non‑hazardous areas.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
