Introduction
The Bently Nevada 3500/22M-01-01-00 288055-01 is a highly advanced and safety-critical module within the GE Bently Nevada 3500 Machinery Protection System. It is a TMR (Triple Modular Redundant) Speed Monitor designed to provide the highest level of reliability and fault tolerance for overspeed protection and speed monitoring.
This module utilizes three independent sensor inputs and three separate internal voting channels to monitor the rotational speed (RPM) of a shaft. It continuously compares all three signals to detect any discrepancies or failures in a single sensor or internal channel. Based on this robust, fault-tolerant input, it provides extremely reliable overspeed protection, underspeed detection, and zero-speed monitoring. The TMR architecture, often using 2-out-of-3 (2oo3) voting logic, ensures that no single point of failure can prevent a necessary shutdown, making it the preferred choice for protecting expensive and safety-critical assets like gas and steam turbines.
Parameters / Specifications
The key technical specifications for the Bently Nevada 3500/22M-01-01-00 288055-01 are summarized in the table below.
| Parameter | Specification |
|---|---|
| Part Number | 3500/22M-01-01-00 288055-01 |
| Product Line | GE Bently Nevada 3500 System |
| Module Type | TMR (Triple Modular Redundant) Speed Monitor |
| Key Function | Overspeed, Underspeed, and Zero-Speed Protection |
| Architecture | Triple Modular Redundant (TMR) |
| Number of Sensor Inputs | 3 (Triple Redundant) |
| Sensor Input | Accepts passive magnetic pickups (MPUs), prox probes, or photocells. |
| Speed Range | 0 to 9999 RPM (or equivalent frequency) |
| Setpoints | 4 programmable setpoints (e.g., Overspeed Trip, Overspeed Alarm, etc.) |
| Voting Logic | 2oo3 (2-out-of-3) for trip outputs; enhances availability and safety. |
| Relay Outputs | 3 TMR Trip Outputs (Form C relays) |
| Power Supply | Derived from the 3500 Rack (redundant power supplies supported) |
| Communication | Via the rack's backplane with the 3500/92 Communication Module |
| Dimensions (H x W) | Standard 3500 Series Module (Approx. 3.9" x 8.7" or 99 mm x 221 mm) |
| Weight (Approx.) | 1.2 lbs (0.54 kg) |
| Operating Temperature | 0°C to +65°C (+32°F to +149°F) |
Application Scenarios
The 3500/22M TMR Speed Monitor is deployed in the most critical applications where the failure of a single speed sensor or monitor channel must not lead to a dangerous situation or a false shutdown. Its primary application is for Overspeed Protection.
Typical application scenarios include:
Turbine Overspeed Protection:
Gas & Steam Turbines: This is the primary application. The module continuously monitors turbine shaft speed via three independent sensors and initiates an immediate and reliable emergency shutdown (trip) if the speed exceeds the predefined dangerous overspeed setpoint. The TMR architecture ensures no single failure can prevent a necessary trip.
Critical Compressor and Pump Trains:
Protecting high-value, high-power compressors and pumps in offshore platforms and pipelines where an overspeed condition could lead to mechanical disintegration and a major safety incident.
Aircraft Derivative Turbines:
Commonly used on aeroderivative gas turbines for power generation and mechanical drive, which require the highest level of integrity for their protection systems.
Generator and Turbine Coast-Down Monitoring:
Monitoring zero-speed or low-speed conditions to ensure a turbine or generator has completely stopped before maintenance can be safely performed (lockout/tagout).
Key Industries:
Power Generation (Combined Cycle, Peaking Plants)
Oil & Gas (Production, LNG, Pipelines)
Petrochemical & Refining
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
