Product Introduction
The 330104-10-16-10-02-00 is a Seismic Velocity Transducer, commonly known as a vibration sensor or pickup. It is designed to measure the surface velocity of vibrating machinery. This type of sensor is typically a permanent magnet moving coil geophone that generates a voltage output proportional to the velocity of vibration. It is used for condition monitoring and machinery protection on a wide range of industrial equipment to detect excessive vibration levels that could lead to machine failure.
Technical Parameters & Specifications
| Parameter Category | Specification |
|---|---|
| Model Number | 330104-10-16-10-02-00 |
| Description | Seismic Velocity Transducer / Vibration Sensor |
| Sensitivity | 100 mV/in/s (Typical for this type) * |
| Measurement Range (Frequency) | 10 Hz to 1000 Hz (Typical) * |
| Measurement Range (Velocity) | 0 to 1.0 inch/sec (0 to 25.4 mm/sec) Peak * |
| Output Signal | Analog Voltage proportional to Velocity |
| Dynamic Range | Up to 2.0 inch/sec (50.8 mm/sec) Peak * |
| Power Supply | Not Required (Self-Generating) |
| Electrical Connector | 2-pin, military-style connector or terminal block (common types) |
| Case Material | Stainless Steel |
| Mounting | 1/4-28 UNF threaded stud (standard for many vibration sensors) |
| Operating Temperature | -50°C to 120°C (-58°F to 248°F) * |
| Dimensions (Body) | Diameter: ~ 1.06 in (27 mm) Height: ~ 2.5 in (63.5 mm) * |
| Weight | Approximately 1.1 lbs (0.5 kg) * |
* Important Note: The parameters marked with an asterisk (*) are typical values for sensors of this kind. The exact, certified specifications for model 330104-10-16-10-02-00 can only be confirmed through the manufacturer's official datasheet (e.g., from Bently Nevada/ Baker Hughes or the specific OEM).
Application Scenarios
This velocity transducer is used for general-purpose vibration monitoring on various types of industrial machinery where mounting a proximity probe is not feasible. Common applications include:
Pumps: Centrifugal, reciprocating, and vertical pumps.
Fans & Blowers: Cooling tower fans, industrial blowers, and exhaust fans.
Electric Motors: Medium to large horsepower motors.
Compressors: Reciprocating and certain centrifugal compressors.
General Rotating Machinery: Any equipment where monitoring bearing housing or casing vibration is critical for predictive maintenance.
Industries: Power Generation, Water/Wastewater, Pulp & Paper, Mining, and HVAC.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
