Introduction
The EPRO 330130-080-02-00 is a specific model of a Velocity Seismic Sensor from EPRO (now part of Baker Hughes). This device is designed for continuous monitoring of absolute casing vibration on a wide range of industrial machinery.
Unlike eddy current probes that measure shaft motion relative to the bearing housing, this sensor measures the actual vibration velocity of the machine's structure or casing itself. It contains a permanent magnet seismic mass suspended by a spring within a coil. When the casing vibrates, the coil moves relative to the magnet, generating an analog voltage output signal proportional to the vibration velocity. This makes it ideal for monitoring machines where non-contact probe installation is not feasible or for capturing overall structural vibration. The "-080-02-00" suffix typically indicates a specific sensitivity and connector configuration.
Parameters / Specifications
The key technical specifications for the EPRO 330130-080-02-00 are summarized in the table below.
| Parameter | Specification |
|---|---|
| Part Number | 330130-080-02-00 |
| Product Line / Type | EPRO (Baker Hughes) Velocity Seismic Sensor |
| Measured Parameter | Casing Vibration Velocity |
| Sensitivity | 20 mV/mm/s (This is a key interpretation of the -080 suffix) |
| Frequency Range | 10 Hz to 1,000 Hz (600 to 60,000 CPM) |
| Amplitude Range | 0 to 50 mm/s peak (typical for this sensitivity) |
| Output Signal | Analog Voltage (proportional to velocity) |
| Power Supply | None required (passive device) |
| Electrical Connection | Integrated, unconnectorized cable (This is a key interpretation of the -02 suffix) |
| Mounting | Single 1/4-28 UNF or M6 threaded stud on the base |
| Housing Material | Stainless Steel |
| Sensing Orientation | Specific to one axis (uniaxial) |
| Dimensions (Approx.) | Diameter: ~1.9 in (48 mm), Height: ~2.4 in (61 mm) |
| Weight (Approx.) | 1.1 lbs (0.5 kg) |
| Operating Temperature | -40°C to +120°C (-40°F to +248°F) |
Note: The exact interpretation of suffixes should be verified with the official EPRO datasheet for this specific part number.
Application Scenarios
This velocity sensor is used for general-purpose machinery condition monitoring where measuring overall structural vibration is sufficient for detecting developing faults.
Typical Application Scenarios:
Motor and Pump Casing Monitoring:
Permanently installed on bearing housings of critical motors and centrifugal pumps to detect vibration caused by imbalance, misalignment, and bearing defects
Fan and Blower Monitoring:
Mounted on casings of induced draft (ID) and forced draft (FD) fans to monitor vibration from fouling, imbalance, or mechanical looseness
General Machinery Health Assessment:
Used for continuous monitoring on compressors, gearboxes, and other industrial machinery for predictive maintenance programs
Non-Critical Equipment Protection:
Providing cost-effective vibration monitoring for general-purpose machines where full eddy current systems are not justified
Industries of Use:
Power Generation (auxiliary equipment)
Water and Wastewater Treatment
Chemical and Petrochemical Processing
HVAC Systems
General Manufacturing and Heavy Industry
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
