Product Introduction
The 330103-00-15-05-01-00 is a Seismic Velocity Transducer, also known as a vibration sensor or pickup. This is a passive, self-generating device designed to measure the vibration velocity of machine housings, bearings, and other structures. It operates on the electromagnetic induction principle, where a coil moves within a magnetic field, generating an AC voltage output that is directly proportional to the vibration velocity. It is a fundamental component for condition monitoring and predictive maintenance programs, helping to prevent machine failures by detecting abnormal vibration levels.
Technical Parameters & Specifications
| Parameter Category | Specification |
|---|---|
| Model Number | 330103-00-15-05-01-00 |
| Product Name | Seismic Velocity Transducer / Vibration Sensor |
| Sensitivity | 100 mV/in/s (Typical) * |
| Frequency Range | 10 Hz to 1,000 Hz (Typical) * |
| Velocity Range | 0 to 1.0 inch/sec (0 to 25.4 mm/sec) Peak * |
| Output Signal | Self-Generated AC Voltage (Passive) |
| Power Requirement | None |
| Electrical Connector | Integral cable or 2-pin connector |
| Case Material | Stainless Steel |
| Mounting | 1/4-28 UNF Threaded Stud |
| Operating Temperature | -50°C to 120°C (-58°F to 248°F) * |
| Dimensions (Body) | Diameter: ~ 1.06 in (27 mm) Height: ~ 2.5 in (63.5 mm) * |
| Weight | Approximately 1.1 lbs (0.5 kg) * |
* Important Note: The parameters provided are typical for this model of velocity transducer. For precise and certified specifications for this exact part number, it is essential to consult the official technical data sheet from the manufacturer (Bently Nevada / Baker Hughes).
Application Scenarios
This velocity transducer is widely used for general-purpose vibration monitoring on various types of industrial machinery where measuring casing or bearing housing vibration is critical.
Industrial Pumps: Centrifugal pumps, boiler feed pumps, and slurry pumps.
Fans & Blowers: Cooling tower fans, induced draft fans, and industrial blowers.
Electric Motors: Medium to large horsepower motors.
Compressors: Reciprocating compressors.
Other Rotating Equipment: Gearboxes, mixers, and conveyors.
Industries: Power Generation, Water and Wastewater, Pulp & Paper, Mining, and Chemical Processing.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
