Product Description
The 330104-00-07-50-02-00 is a 5 mm Eddy Current Proximity Transducer System component from the Bently Nevada 3300 series, a globally recognized system for machinery condition monitoring. This specific part number denotes a complete transducer assembly, which integrates a 5 mm proximity probe with a fixed-length, permanently attached cable, terminated with a -02 style connector. This "all-in-one" design ensures signal integrity from the sensor tip to the connector, eliminating a potential failure point and simplifying installation. It is designed to accurately measure shaft vibration, position (gap), and speed (Keyphasor®) on critical rotating machinery.
Key Parameters and Specifications
The following table summarizes the key technical parameters for this model.
| Parameter | Specification / Value |
|---|---|
| Compatible System | Bently Nevada 3300 / 3500 Vibration Monitoring System |
| Product Type | 5 mm Proximity Transducer Assembly (Integrated Probe and Cable) |
| Probe Diameter | 5 mm (0.197 inches) |
| Thread Size | 5-40 UNF (Standard for 5mm probes) |
| Connector Type | -02 Style Connector, a robust, threaded connector for a secure link to a junction box or extension cable. |
| Cable Length | 7 feet (2.13 meters). The "-07-" in the part number specifies this length. |
| Target Material | 4140 Steel or equivalent AISI 1040 Steel |
| Sensitivity | 200 mV/mil (7.87 V/mm) - Typical |
| Linear Range | Approximately 0.25 to 0.76 mm (10 to 30 mils) from the target |
| Frequency Response | 0 to 10 kHz |
| Operating Temperature Range | Probe: -35°C to 177°C (-31°F to 350°F) Cable: -40°C to 150°C (-40°F to 302°F) |
| Dimensions & Weight | Probe Body: ~ 40 mm length x 5 mm diameter (1.57" x 0.197") Connector: Standard -02 form factor. Overall Assembly: 7 ft (2.13 m) total length. Approx. Weight: 0.25 kg (0.55 lbs) |
Application Scenarios
This integrated transducer is used for critical machinery protection in industries where reliability and precision are paramount. The 7-foot cable length makes it suitable for applications where the monitoring junction box is located close to the measurement point.
Power Generation: Ideal for monitoring steam turbines and gas turbines, particularly on bearings where the junction box is mounted nearby. It provides essential data on shaft vibration and radial position.
Oil & Gas: Used on critical high-speed equipment like compressors and pumps. The integrated design and robust connector prevent connection failures in vibration-intensive environments, helping to meet API 670 standards.
Aerospace Test Cells: Employed in engine test stands where a compact and reliable sensor assembly is required for precise vibration measurement.
General Heavy Industry: Protecting motors, fans, and gearboxes where the short cable length is sufficient and the integrated design reduces installation time and potential errors.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
