Introduction
The 3300/45 is a Dual Velocity Monitor module from the Bently Nevada 3300 Machinery Protection System. This module is designed to continuously monitor the casing vibration (velocity) of industrial machinery using signals from two seismic transducers, typically piezoelectric velocity sensors or 4-20 mA loop-powered vibration transmitters. Its primary function is to protect assets by providing Alert and Danger alarms when vibration levels exceed predefined setpoints. The 3300/45 is a key component for condition-based maintenance, helping to prevent damage to equipment like fans, pumps, and motors by detecting issues such as imbalance, misalignment, and bearing wear.
Technical Parameters
The following table outlines the key technical specifications for the 3300/45 monitor.
| Parameter Category | Specification |
|---|---|
| Part Number | 3300/45 |
| Description | Dual Channel Velocity Monitor |
| Physical Dimensions (H x W x D) | Approximately 128 mm x 40 mm x 200 mm (5.04 in x 1.57 in x 7.87 in) *Standard single-slot module for a 3300 rack.* |
| Weight | Approximately 0.5 kg (1.1 lbs) |
| Input Channels | 2 independent channels |
| Input Signal | Accepts signals from velocity transducers or 4-20 mA transmitters. |
| Frequency Range | 4.5 Hz to 450 Hz (270 to 27,000 CPM) - or 10 Hz to 1000 Hz (600 to 60,000 CPM) [Depends on jumper configuration] |
| Alarm Outputs | Two programmable setpoints per channel (Alert and Danger) with dedicated relay outputs. |
| Dynamic Output | Yes (Buffered raw signal for oscilloscope or analyzer) |
| Power Supply | Powered by the 3300 rack via the backplane. |
| LED Indicators | Per channel: OK, Alert, Danger, and Bypass |
| Operating Temperature | 0°C to 65°C (32°F to 149°F) |
*Note: These specifications are representative of the 3300/45 module. The exact frequency range is set by internal jumpers. Always consult the official Bently Nevada 3300/45 documentation for precise configuration and wiring details.*
Application Scenarios
The 3300/45 Velocity Monitor is widely used for protecting machinery where casing vibration is the primary indicator of mechanical health.
Motor Condition Monitoring:
Installed on critical motors in manufacturing and processing plants. It monitors bearing housing vibration to detect imbalance, looseness, and bearing defects, triggering alarms before failure occurs.
Pump Protection:
Used on centrifugal and positive displacement pumps in water treatment, chemical, and oil & gas industries. It guards against excessive vibration caused by cavitation, bearing wear, or impeller issues.
Fans and Blowers:
Essential for monitoring large industrial fans, such as those in cooling towers, power boilers, and HVAC systems. It helps prevent catastrophic failures due to imbalance, structural resonance, or bearing deterioration.
Compressors:
Applied to rotary screw and reciprocating compressors to monitor casing vibration, providing an early warning of mechanical problems that could lead to unplanned downtime.
General Rotating Machinery:
An ideal solution for a wide range of auxiliary equipment where reliable casing vibration monitoring is required for a predictive maintenance strategy, without the need for shaft-relative measurement.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
