330103-00-15-10-02-00 Vibration Transmitter
Introduction
The 330103-00-15-10-02-00 is a 4-20 mA two-wire loop powered vibration transmitter designed for continuous condition monitoring of industrial machinery. This compact device integrates a piezoelectric accelerometer with advanced signal conditioning electronics to provide reliable vibration velocity measurement. Its robust construction and simple installation make it ideal for various industrial applications where machinery protection and predictive maintenance are critical.
Key Parameters
| Parameter Category | Specification |
|---|---|
| Model Type | 4-20 mA Two-Wire Vibration Transmitter |
| Measurement Parameter | Vibration Velocity (RMS) |
| Output Signal | 4-20 mA, Two-Wire Loop Powered |
| Power Supply | 12-30 V DC |
| Frequency Range | 10 Hz to 1,000 Hz |
| Measurement Range | 0-25 mm/s RMS (0-1.0 in/s RMS) |
| Sensitivity | 100 mV/g (typical) |
| Accuracy | ±2% of Full Scale |
| Frequency Response | 10 Hz to 1 kHz (±3 dB) |
| Housing Material | Stainless Steel 316 |
| Electrical Connection | Integral cable or connector |
| Process Connection | M10 x 1.5 or 1/4-28 UNF mounting stud |
| Operating Temperature | -30°C to +85°C (-22°F to +185°F) |
| Storage Temperature | -40°C to +100°C (-40°F to +212°F) |
| Shock Survival | 1000 g peak |
| Dimensions | 80 mm H x 35 mm Ø (3.15" x 1.38") |
| Weight | 320 g (0.71 lbs) |
Application Scenarios
Industrial Motor Monitoring
Continuous bearing condition monitoring for AC/DC motors
Motor vibration trending and predictive maintenance
Early detection of mechanical faults and imbalances
Pump System Protection
Centrifugal pump vibration monitoring
Bearing wear detection and impeller condition assessment
Preventive maintenance implementation in fluid handling systems
Fan and Blower Applications
HVAC system large fan monitoring
Industrial exhaust fan protection
Air handling unit vibration assessment
General Rotating Equipment
Compressor vibration monitoring
Conveyor system drive unit protection
Gearbox and transmission system monitoring
The 330103-00-15-10-02-00 vibration transmitter provides a cost-effective and reliable solution for converting mechanical vibration into a standardized 4-20 mA signal, enabling seamless integration with PLCs, DCS, SCADA, and other control systems for comprehensive predictive maintenance strategies.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
