Product Description
The 330101-00-50-15-02-05 is a 5 mm Eddy Current Proximity Transducer System component from the Bently Nevada 3300 series. This part number represents a complete, integrated transducer assembly. It consists of a 5 mm proximity probe, a permanently attached 50-foot long cable, and is terminated with a -05 "California Style" connector. This "Tip-to-Card" design ensures optimal signal integrity by eliminating intermediate connection points, making it ready to plug directly into a compatible proximitor (preamplifier) slot in a monitoring rack. It is engineered for high-precision measurement of shaft vibration, position (gap), and speed (Keyphasor®) on critical rotating machinery where a long cable run is required.
Key Parameters and Specifications
The following table summarizes the key technical parameters for this model.
| Parameter | Specification / Value |
|---|---|
| Compatible System | Bently Nevada 3300 / 3500 Monitoring System |
| Product Type | 5 mm Proximity Transducer Assembly (Integrated Probe and Cable) |
| Probe Diameter | 5 mm (0.197 inches) |
| Thread Size | 5-40 UNF (Standard for 5mm probes) |
| Connector Type | -05 "California Style" Connector, plugs directly into the matching proximitor card. |
| Cable Length | 50 feet (15.24 meters). The "-50-" in the part number specifies this length. |
| Target Material | 4140 Steel or equivalent AISI 1040 Steel |
| Sensitivity | 200 mV/mil (7.87 V/mm) - Typical |
| Linear Range | Approximately 0.25 to 0.76 mm (10 to 30 mils) from the target |
| Frequency Response | 0 to 10 kHz |
| Operating Temperature Range | Probe: -35°C to 177°C (-31°F to 350°F) Cable: -40°C to 150°C (-40°F to 302°F) |
| Dimensions & Weight | Probe Body: ~ 40 mm length x 5 mm diameter (1.57" x 0.197") Connector: Standard "California Style" form factor. Overall Assembly: 50 ft (15.24 m) total length. Approx. Weight: 1.5 kg (3.3 lbs) |
Application Scenarios
This transducer assembly is designed for high-reliability monitoring in environments where a direct connection from the sensor to the monitoring system's rack is required over a long distance.
Power Generation: Ideal for monitoring steam turbines and gas turbines where the monitoring rack is located far from the measurement point. The 50-foot cable provides the necessary reach for flexible routing within a power plant enclosure.
Oil & Gas: Used on critical high-speed equipment like compressors and pumps in large facilities. The long cable and "California Style" connector are perfect for rack-based systems that need to cover extensive areas, aiding in compliance with API 670 standards.
Hydroelectric Power Plants: Monitoring generators and turbines where long cable runs from the shaft to the central control room are common.
General Heavy Industry: Condition monitoring of motors, fans, and gearboxes in large industrial plants where signals must be routed over long distances directly back to a centralized monitoring rack.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
