330104-000-040-10-02-05 Proximity Transducer System (PTS)
Description:
The part number 330104-000-040-10-02-05 refers to a specific configuration of a 5 mm Proximity Transducer System (PTS) from Baker Hughes (Bently Nevada). This is a complete, pre-calibrated kit designed for a single channel of measurement on rotating machinery, specifically used in applications where space is highly constrained and a smaller probe diameter is required.
It is an integrated package that contains all matched components for immediate installation:
One 5mm Proximity Probe
One Extension Cable
One Proximitor (Oscillator/Demodulator)
This system functions identically to the standard 8 mm systems but uses a smaller 5mm diameter probe. It measures the distance between the probe tip and a conductive target to monitor radial vibration, axial position, or speed (Keyphasor).
Parameters & Specifications
The following table details the key parameters for this specific configuration based on the standard Bently Nevada part numbering scheme.
| Parameter | Specification / Interpretation |
|---|---|
| Part Number | 330104-000-040-10-02-05 |
| System Type | 5 mm Proximity Transducer System (PTS) |
| System Function | Vibration / Position / Keyphasor® Measurement |
| Probe Length | -040- = 40 mm (1.57 inches) from mounting thread to tip. |
| Probe Diameter | 5 mm (specified by the "330104" prefix) |
| Connector Type | -10- = Standard "English" Thread (UNF 5/8-24) on the probe. |
| Cable Length | -02- = 2 meters (6.6 feet) of integral cable plus extension cable. |
| Proximitor Model | -05 = Likely refers to a standard 5-meter (16.4 ft) coaxial cable and a specific 5mm Proximitor version. |
| Target Material | AISI 4140 Steel or equivalent (standard for calibration). |
| Linear Range | 0.1 to 0.8 mm (4 to 32 mils) - typical for 5mm systems. |
| Scale Factor | 7.87 V/mm (200 mV/mil) |
| Power Supply | Proximitor typically requires -18 VDC to -26 VDC. |
| Output Signal | -1 V to -11 VDC (or 0 to -22 VDC for two-wire systems) proportional to gap. |
| Operating Temperature (Probe) | Up to 177°C (350°F) with standard cable. |
| Typical Probe Weight | ~ 0.08 kg (0.18 lbs) |
| Typical Proximitor Weight | ~ 0.5 kg (1.1 lbs) |
| Mounting Thread | A smaller thread size compatible with the 5mm probe body (e.g., 10-32 UNF). |
Important Note: The interpretation of suffixes, especially the mounting thread for a 5mm probe, should be confirmed with the official Baker Hughes Bently Nevada PTS Selection Guide. The 40mm length is a common and versatile size for 5mm probes.
Application Scenarios
This 5 mm Proximity Transducer System is designed for applications where a standard 8 mm probe is too large to fit. Its compact 5mm diameter and 40mm length make it suitable for tight spaces and small-to-medium sized machinery.
Vibration Monitoring on Small Bore Machinery: The primary application is on machines with small shaft diameters and limited space for probe installation, such as:
Small Turbines and Turboexpanders
High-Speed Spindles and Pinion Shafts
Small Pumps and Compressors
Keyphasor® Reference on Space-Constrained Equipment: Used as a once-per-revolution timing probe in applications where the mounting location is very tight and only a small-diameter probe can be physically installed.
Axial Position Monitoring on Compact Thrust Assemblies: Used to measure thrust position on smaller machines where the thrust collar and associated structure do not allow for an 8 mm probe.
Integrally Geared Compressors: Frequently used on the high-speed pinion shafts of integrally geared compressors, where space between gear meshes and bearings is extremely limited.
Research and Development Test Rigs: Often used in laboratory settings and benchtop test rigs where machinery scale is small, and precise measurements are needed with minimal intrusion.
Typical Machinery:
High-Speed Pinion Shafts in Gearboxes
Turbochargers
Small Integrally Geared Compressors
High-Speed Motors and Spindles
Small Steam Turbines
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
