3500/15-01-01-00 (127610-01) Monitoring System Module
Description:
The 3500/15-01-01-00, also known by the alternate part number 127610-01, is a Power Supply module for the Bently Nevada 3500 Machinery Monitoring System. This module is a critical system component that provides regulated DC power to all other modules installed in the 3500 rack frame.
It converts the incoming AC or DC plant power to the specific DC voltage levels required by the monitoring, relay, and communication modules within the rack. A stable and reliable power supply is fundamental to the entire monitoring system's operation, as any power disruption can lead to loss of monitoring data and potentially compromise machinery protection.
Parameters & Specifications
The following table details the key parameters for this module. The part number suffix -01-01-00 specifies its hardware configuration and firmware version.
| Parameter | Specification |
|---|---|
| Primary Part Number | 3500/15-01-01-00 |
| Alternate Part Number | 127610-01 |
| Module Type | Power Supply |
| Compatibility | Bently Nevada 3500 Rack Frame |
| Slot Requirement | Single Slot (typically the left-most slot in the rack) |
| Typical Dimensions (H x W x D) | Approx. 193 mm x 27 mm x 170 mm (7.6 in x 1.06 in x 6.7 in) |
| Typical Weight | Approx. 0.6 kg (1.3 lbs) |
| Input Power | Configurable for a range of standard voltages (e.g., 120/240 VAC, 125 VDC). |
| Output Voltages | +5 VDC, ±15 VDC for the rack backplane. |
| Output Power | Typically 45 Watts (sufficient to power a fully populated rack). |
| Redundancy Support | Yes. A second 3500/15 power supply can be installed in the same rack to provide hot-backup redundancy. If the primary supply fails, the secondary takes over without interruption. |
| Status Monitoring | Provides health status (OK/Not OK) to the system framework. |
| Operating Temperature | -30°C to +65°C (-22°F to 149°F) |
| Primary Function | To provide clean, stable, and reliable power to all modules in the 3500 rack. |
*Note: The exact dimensions and weight are approximate. For specific input voltage ranges and installation details, always consult the official Baker Hughes 3500/15 Power Supply Module Documentation.*
Application Scenarios
The 3500/15 Power Supply is a foundational component in every 3500 system installation. Its role is to ensure the entire monitoring and protection system remains operational.
Primary System Power for any 3500 Rack: Installed as the main power source in any 3500 rack used for machinery monitoring, from a small 4-slot rack to a full 16-slot rack.
Redundant Power Configurations for Critical Machinery: In applications where system uptime is paramount (e.g., on a main turbine-generator set), a second 3500/15 module is installed to provide a redundant, hot-swappable power source. This ensures a single power supply failure does not disable the entire machinery protection system.
Powering Complex Monitoring Systems: Provides the necessary power for a mix of modules, including vibration monitors (3500/20), Keyphasor modules (3500/25), relay modules (3500/32), and communication gateways (3500/92).
Harsh Industrial Environments: Designed to operate reliably in the electrical noise and temperature variations typical of power generation, oil & gas, and other industrial plant environments.
Retrofit and System Upgrades: Used to replace older or failed power supply modules during system upgrades or maintenance.
Typical Use Case:
This module is the heart of a 3500 rack installed in a control panel for a gas turbine. It takes 120 VAC from the plant's uninterruptible power supply (UPS) and converts it to the clean DC power needed by the vibration monitors watching the turbine's bearings and the relays ready to initiate a shutdown if dangerous conditions are detected. A second 3500/15 is installed right next to it for redundancy, ensuring the protection system remains online even during a power supply failure.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
