Introduction
The model 3500/15-05-00-00 is a Relay Module for the Bently Nevada 3500 Machinery Protection System. This module is a critical output component that converts alarm decisions from the monitoring system (such as Alert and Danger/Danger) into physical, hardwired relay contacts. These contacts are used to initiate alarms, start auxiliary equipment, or safely shutdown machinery to prevent damage. The "-05" suffix typically indicates a specific relay configuration, often defining the number of relays, their contact type (e.g., Form-C), and the default state (e.g., de-energized or energized).
Parameters / Specifications
The following table outlines the key technical parameters for the 3500/15-05-00-00 module.
| Parameter | Specification |
|---|---|
| Model Number | 3500/15-05-00-00 |
| Description | Relay Module |
| Physical Dimensions (H x W x D) | Approx. 190 mm x 40 mm x 120 mm (7.5 in x 1.6 in x 4.7 in) [Standard 3500 Series frame slot] |
| Weight | Approx. 0.5 kg (1.1 lb) |
| Number of Independent Relays | 2 or 4 (depending on the specific -05 configuration) |
| Relay Contact Type | Typically DPDT (Double-Pole, Double-Throw) Form-C contacts. |
| Default State | Typically "De-energized to Trip" (the relay de-energizes upon an alarm condition). Other configurations are available. |
| Contact Rating | Typically 2 Amps @ 30 VDC / 0.5 Amp @ 120 VAC (Resistive). [Exact rating depends on configuration] |
| Power Supply | Powered by the 3500 rack; typically +24 VDC from the system power supply. |
| Isolation | 500 V RMS between field wiring and frame ground. |
| Operating Temperature | 0°C to +65°C (+32°F to +149°F) |
| Compatibility | Bently Nevada 3500 Series Rack. Requires a compatible power supply and monitoring module (e.g., Vibration, Speed, Position) to provide the alarm signal. |
*Note: The exact relay count, contact rating, and default state are defined by the "-05" configuration code. Always refer to the official product datasheet or manual for the specific relay configuration.*
Application Scenarios
The 3500/15 Relay Module is a fundamental safety and control component in machinery protection systems across various industries.
Machine Shutdown (Trip):
The primary application is to safely shutdown rotating equipment (turbines, compressors, pumps) by breaking the circuit to the prime mover's shutdown solenoid when a "Danger" alarm condition is detected, preventing catastrophic failure.
Alarm Annunciation:
Used to activate visual and audible alarms in the control room or locally when an "Alert" (warning) or "Danger" condition is detected, prompting operator attention.
Sequencing and Control:
Initiating auxiliary sequences, such as starting standby lubrication pumps, opening diversion valves, or activating annunciator panels when a specific machine fault is identified.
Redundant Safety Systems:
Often used in pairs or groups to provide redundant shutdown paths for critical machinery, ensuring a single component failure does not prevent a safe shutdown.
Process Safety in O&G and Power Generation:
A key component in Safety Instrumented Systems (SIS) and machinery protection logic for critical assets in industries like oil & gas, petrochemical, and power generation, where equipment failure can have severe consequences.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
