Introduction
The model 330102-00-27-10-02-05 is a 4-20 mA DC Velocity Seismic Transmitter from the Bently Nevada 3300 series. This device is designed to measure the casing or absolute vibration (expressed as velocity) of rotating machinery and transmit a standardized, loop-powered 4-20 mA signal proportional to the vibration level. The specific suffixes in the model number define its key characteristics: -27 indicates a high-sensitivity 500 mV/g internal accelerometer, -10 specifies a 25.4 mm/s (1.0 in/s) peak velocity range, and -02-05 define the electrical connector and mechanical configuration. This high-sensitivity version is particularly suited for detecting low-level vibrations or for use on machines with inherently lower vibration levels.
Parameters / Specifications
The following table outlines the key technical parameters for the 330102-00-27-10-02-05 transducer.
| Parameter | Specification |
|---|---|
| Model Number | 330102-00-27-10-02-05 |
| Description | 4-20 mA DC Velocity Seismic Transmitter (High Sensitivity) |
| Physical Dimensions | Approx. 78.7 mm (3.10 in) in height (excluding connector) x 35.1 mm (1.38 in) diameter. [Based on standard housing for this configuration] |
| Weight | Approx. 0.34 kg (0.75 lb) |
| Measurement | Casing Vibration (Velocity) |
| Output Signal | 4-20 mA, 2-Wire, Loop Powered |
| Velocity Range | 0 to 25.4 mm/s True Peak (0 to 1.0 in/s True Peak) |
| Accelerometer Sensitivity | 500 mV/g (internal sensing element, high sensitivity) |
| Frequency Response | 4.5 Hz to 1000 Hz (270 CPM to 60,000 CPM) |
| Power Supply | 12 to 30 VDC |
| Sensitivity | 0.63 mA/mm/s (16 mA/in/s) |
| Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
| Housing Material | Stainless Steel |
| Electrical Connection | Integral, two-pin, military-style connector (e.g., MS3106A-20-9S). The -02-05 suffix typically specifies a connector style and top exit configuration. |
| Compliance | CE Marked |
*Note: The dimensions and weight are typical values for this model series. The critical differentiator for this model is its high-sensitivity internal element (500 mV/g), which provides a stronger signal for detecting low-amplitude vibrations. Always verify against the official manufacturer's datasheet for the precise configuration.*
Application Scenarios
This high-sensitivity transmitter is used for reliable, continuous vibration monitoring, especially where detecting subtle changes in machine condition is critical.
Monitoring of Low-Vibration Machinery:
Ideal for applications on machines that naturally operate with very low vibration levels, where a standard transmitter might not provide a strong enough signal for accurate monitoring and early fault detection.
Early Fault Detection:
The high sensitivity makes it excellent for detecting the initial, low-level vibrations associated with the very early stages of bearing degradation, slight misalignment, or developing imbalance, allowing for proactive maintenance.
Precision Motor and Fan Monitoring:
Well-suited for monitoring high-speed precision motors, integrally geared compressors, and other equipment where capturing subtle dynamic changes is essential for predictive maintenance programs.
Direct PLC/DCS Integration for Critical Assets:
Its standard 4-20 mA, two-wire output allows for direct connection to control systems, providing high-fidelity vibration data for the most critical assets in a plant.
Rugged Industrial Environments Requiring High Signal-to-Noise Ratio:
The high output signal helps maintain a good signal-to-noise ratio in electrically noisy environments, ensuring reliable data is received by the control system for accurate machinery protection.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
