Introduction
The model 3500/05-01-02-00-00-01 is a Seismic Monitor Module from the Bently Nevada 3500 Machinery Protection System. This module is specifically designed to interface with seismic transducers, such as accelerometers and velocity sensors, to monitor the absolute (casing) vibration of machinery. The suffixes in the part number define its configuration: it is set up for two channels of seismic monitoring, and the "-01" at the end typically indicates a specific hardware revision or a customized firmware version. This module conditions the input signals, processes them to derive velocity and/or acceleration values, and provides alerts and danger signals based on user-configured setpoints.
Parameters / Specifications
The following table outlines the key technical parameters for the 3500/05-01-02-00-00-01 module.
| Parameter | Specification |
|---|---|
| Model Number | 3500/05-01-02-00-00-01 |
| Description | Seismic Monitor Module (2-Channel) |
| Physical Dimensions (H x W x D) | Approx. 190 mm x 40 mm x 120 mm (7.5 in x 1.6 in x 4.7 in) [Standard 3500 Series frame slot] |
| Weight | Approx. 0.45 kg (1.0 lb) |
| Input Channels | 2 Independent Seismic Input Channels |
| Input Type | Accepts signals from ICP®/IEPE type accelerometers or velocity sensors |
| Power Supply | Powered by the 3500 rack; typically +24 VDC from the system power supply |
| Operating Temperature | 0°C to +65°C (32°F to 149°F) |
| Compatibility | Bently Nevada 3500 Series Rack |
*Note: The specific dynamic range, frequency response, and signal processing capabilities (e.g., FFT, overall values) are defined by the firmware and configuration. The "-01" revision may include specific enhancements or compatibility updates. Always refer to the official product documentation for this specific version.*
Application Scenarios
This seismic monitor is deployed to protect machinery by monitoring the vibration of the machine's structure or casing.
Motor and Pump Casing Vibration Monitoring:
Used to monitor the overall vibration levels of motors, pumps, fans, and compressors by mounting accelerometers or velocity sensors directly on the bearing housings. This helps detect faults like imbalance, misalignment, and bearing wear.
Turbine Foundation and Structure Monitoring:
Monitors the absolute vibration of turbine foundations, skids, and other supporting structures to ensure structural integrity and detect any abnormal shaking or resonance.
General Purpose Machinery Protection:
Serves as a primary data source for condition-based maintenance programs on a wide range of industrial machinery where measuring shaft vibration with proximity probes is not feasible or is used in conjunction with it.
Auxiliary Equipment Monitoring:
Protects critical auxiliary drives, gearboxes, and other supporting equipment that are essential for the main process unit's operation.
API 670 Compliant Systems:
Can be part of a machinery protection system designed to meet API 670 standards, providing the required monitoring for casing vibration on designated equipment.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
