Introduction
The model 84147-01 is a Magnetic Speed Sensor, also known as a Variable Reluctance (VR) Sensor or passive magnetic pickup. This is a rugged, self-generating transducer designed to detect the speed and timing of rotating ferrous targets, such as gear teeth or keyed shafts. It operates on the principle of electromagnetic induction, generating an AC voltage signal whose frequency is directly proportional to the speed of the passing target. The 84147-01 is known for its simplicity, reliability, and ability to operate in harsh environments without an external power supply, making it a fundamental component for speed sensing and overspeed protection in industrial applications.
Parameters / Specifications
The following table outlines the key technical parameters for the 84147-01 speed sensor.
| Parameter | Specification |
|---|---|
| Model Number | 84147-01 |
| Description | Magnetic Speed (Variable Reluctance) Sensor |
| Physical Dimensions | Approx. 96 mm (3.78 in) overall length. Body Diameter: 19 mm (0.75 in) hex. Thread Size: 5/8-18 UNF. |
| Weight | Approx. 0.25 kg (0.55 lb) |
| Operating Principle | Variable Reluctance (Passive, Self-Generating) |
| Output Signal | AC Sine Wave (Amplitude and frequency increase with speed) |
| Supply Voltage | Not Required (Self-generating) |
| Air Gap (Recommended) | 0.25 to 1.5 mm (0.010 to 0.060 in) from gear tooth |
| Output Voltage | Dependent on speed, air gap, and target size. Typically several Volts AC to over 50 VAC at higher speeds. |
| Temperature Range | -40°C to +120°C (-40°F to +250°F) [Standard] |
| Electrical Connection | Integral, 2-conductor shielded cable (length varies by order code). |
| Housing Material | 400 Series Stainless Steel |
Note: The output voltage is highly dependent on operational conditions. At very low speeds, the signal may be too weak for some monitoring systems to detect reliably. Always confirm the exact cable length and temperature rating for the specific order code.
Application Scenarios
The 84147-01 magnetic speed sensor is a fundamental component for speed measurement and overspeed protection across various industries.
Gas Turbine Speed Monitoring & Overspeed Protection:
A primary application is on industrial gas turbines, where it serves as a key input for the governing control system and provides critical speed data for overspeed trip protection to prevent catastrophic failure.
Engine and Compressor Speed Sensing:
Widely used on reciprocating engines and compressors in the oil and gas industry to monitor engine RPM and compressor speed for control and safety systems.
Tachometer Reference for Rotating Machinery:
Used to provide a once-per-revolution "Keyphasor®" or "Zero Speed" signal for vibration monitoring systems on large pumps, fans, and gearboxes, enabling phase analysis and startup/shutdown monitoring.
Heavy-Duty Mobile Equipment:
Employed on mining, agricultural, and marine equipment for monitoring the speed of shafts, gears, and engines in demanding environments where reliability is paramount.
General Industrial Speed Measurement:
Used anywhere a simple, robust, and passive speed detection solution is needed on ferrous rotating components, such as on conveyors, mixers, and processing lines.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
