Introduction
The model 330180-52-05 is a 3300 XL Seismic Transmitter (4-20 mA) from Baker Hughes Bently Nevada. This device is a robust, loop-powered transducer designed to measure the casing or absolute vibration (expressed as velocity) of rotating machinery. It integrates a piezoelectric accelerometer with internal signal conditioning electronics to produce a standardized 4-20 mA output that is directly proportional to vibration severity. The -52-05 suffix indicates a specific configuration, often related to sensitivity, connector type, and a top-exit cable or connector orientation. This transmitter is ideal for direct integration into control systems, PLCs, and DCS for continuous machinery protection and monitoring.
Parameters / Specifications
The following table outlines the key technical parameters for the 330180-52-05 transducer.
| Parameter | Specification |
|---|---|
| Model Number | 330180-52-05 |
| Description | 4-20 mA Velocity Seismic Transmitter |
| Physical Dimensions | Approx. 78 mm (3.07 in) in height (excluding connector) x 35 mm (1.38 in) diameter. |
| Weight | Approx. 0.34 kg (0.75 lb) |
| Measurement | Casing Vibration (Velocity) |
| Output Signal | 4-20 mA, 2-Wire, Loop Powered |
| Velocity Range | 0 to 25.4 mm/s True Peak (0 to 1.0 in/s True Peak) |
| Frequency Response | 4.5 Hz to 1000 Hz (270 CPM to 60,000 CPM) |
| Power Supply | 12 to 30 VDC |
| Sensitivity | 0.63 mA/mm/s (16 mA/in/s) |
| Housing Material | Stainless Steel |
| Electrical Connection | The -05 suffix typically specifies a connector style and top exit configuration (e.g., a top-exit military-style connector). |
| Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
| Compliance | CE Marked |
Note: The dimensions and weight are typical values for this model series. The specific suffix -52-05 defines the internal sensitivity and the top-exit connector details. Always consult the official manufacturer's datasheet for the precise configuration.
Application Scenarios
This transmitter is widely used for reliable, continuous vibration monitoring across a wide range of industrial applications where a standard 4-20 mA signal is required.
Motor and Pump Casing Vibration Monitoring:
Permanently mounted on the bearing housings of motors, pumps, fans, and blowers to provide a continuous 4-20 mA signal for alarm and shutdown functions in a machinery protection system. The top-exit connector can be beneficial in tight spaces or for specific cable routing needs.
Direct PLC/DCS Integration:
Its standard 4-20 mA, two-wire output makes it perfectly suited for direct connection to a plant's Distributed Control System (DCS) or Programmable Logic Controller (PLC), enabling centralized monitoring of machine health from the control room.
General Purpose Machinery Protection:
Used for monitoring a wide variety of industrial machinery where measuring absolute casing vibration is sufficient for detecting overall machine health and faults like imbalance and misalignment.
HVAC Systems:
Ideal for monitoring fans and pumps in Heating, Ventilation, and Air Conditioning (HVAC) systems to ensure smooth operation and provide early warning of mechanical degradation.
Rugged Industrial Environments:
The stainless steel housing and robust construction make it suitable for use in demanding environments, including oil & gas, chemical plants, and power generation, where reliable operation is critical.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
