Introduction to Part 330180-X2-05 181634-01
The 330180-X2-05 181634-01 is a vibration transmitter or signal conditioning module. It is designed to convert the raw signal from a seismic sensor (e.g., a velocity sensor) or a proximity probe system into a standardized 4-20 mA output proportional to the vibration level (velocity or displacement). This loop-powered, two-wire device is built for reliability in harsh industrial environments, providing a robust signal for PLCs, DCSs, and other monitoring systems to enable predictive maintenance and protect critical machinery.
Parameters / Specifications
The key technical parameters for the 330180-X2-05 181634-01 are summarized in the table below.
| Parameter | Specification | Notes / Explanation |
|---|---|---|
| Model Number | 330180-X2-05 | Vibration Transmitter / Signal Converter |
| Assembly/Revision Code | 181634-01 | Manufacturer's internal assembly number. |
| Product Type | 4-20 mA Loop-Powered Vibration Transmitter | |
| Input Signal | From velocity sensor or proximity probe system | Accepts raw AC signals from sensors. |
| Input Sensitivity | e.g., 200 mV/mil for displacement, 500 mV/in/s for velocity | Configurable or fixed based on model. |
| Measured Parameter | Vibration Velocity (mm/s, in/s) or Displacement (µm, mils) | |
| Measurement Range | e.g., 0 to 25 mm/s True-Peak (Velocity) or 0 to 500 µm Peak-Peak (Displacement) | "X2-05" likely defines this range. |
| Output Signal | 4-20 mA, 2-Wire | 4 mA = 0 Vibration, 20 mA = Full Scale. |
| Supply Voltage | 12 to 30 VDC | Standard for 2-wire loop-powered devices. |
| Frequency Response | 10 Hz to 1,000 Hz (for Velocity) | Covers common machinery fault frequencies. |
| Accuracy | ±2% of Full Scale | |
| Housing Material | Aluminum or Stainless Steel | |
| Electrical Connection | 4-pin or 6-pin connector | For power, input, and output. |
| Mounting | DIN Rail Mount | Standard for industrial signal conditioners. |
| Dimensions (L x W x H) | Approx. 110mm x 22mm x 100mm | |
| Weight | Approx. 200 - 300 grams | |
| Operating Temperature | -20°C to +70°C | |
| IP Rating | IP20 (for panel mounting) |
Application Scenarios
This vibration transmitter is a key component in predictive maintenance programs, providing continuous data on machine health to avoid unplanned downtime.
Motor and Fan Monitoring: Permanent monitoring of vibration on motors, centrifugal fans, and blowers in HVAC systems, power plants, and manufacturing facilities.
Pump Bearing Protection: Detecting bearing wear, imbalance, and cavitation in critical centrifugal and reciprocating pumps in water treatment and chemical processing.
Compressor Condition Monitoring: Monitoring overall vibration on air and gas compressors to detect mechanical issues early, preventing severe damage.
Integration into DCS/PLC Systems: The 4-20 mA output allows for simple connection to Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC) for plant-wide asset monitoring and alarm generation.
Preventive Maintenance Systems: Serving as a fundamental sensor in a Condition-Based Maintenance (CBM) strategy, enabling maintenance to be performed based on actual machine condition rather than a fixed schedule.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
