Product Introduction: 9200-01-02-02-00
The 9200-01-02-02-00 is a Vibration Transmitter designed to continuously monitor the overall vibration levels of industrial machinery. This device typically integrates a piezoelectric accelerometer with built-in signal conditioning electronics to provide a standardized 4-20 mA output signal that is proportional to the vibration velocity or acceleration. It is a key component for predictive maintenance programs, allowing for the direct connection to Programmable Logic Controllers (PLCs), Distributed Control Systems (DCS), or other monitoring systems for real-time machine health assessment.
Technical Parameters
The key technical specifications for the 9200-01-02-02-00 vibration transmitter are summarized in the table below.
| Parameter | Specification |
|---|---|
| Part Number | 9200-01-02-02-00 |
| Type | 4-20 mA Loop-Powered Vibration Transmitter |
| Sensing Element | Piezoelectric Accelerometer |
| Dimensions | Approx. 70 mm (H) x 30 mm (Diameter) |
| Weight | 0.25 kg |
| Output Signal | 4-20 mA, Two-Wire |
| Power Supply | 12 to 30 VDC |
| Measurement Range | 0 to 25.4 mm/s (True Peak) or equivalent in acceleration |
| Frequency Response | 10 Hz to 1000 Hz (±3 dB) |
| Sensitivity | 0.63 mA/mm/s (e.g., 4 mA = 0 mm/s, 20 mA = 25.4 mm/s) |
| Operating Temperature Range | -30°C to +80°C |
| Housing Material | 316 Stainless Steel |
| Electrical Connection | 2-pin, integral cable, or conduit entry |
Application Scenarios
This vibration transmitter is widely used for cost-effective, continuous condition monitoring on a variety of industrial assets.
Motor and Pump Monitoring:
Permanently installed on critical motors and pumps in HVAC systems, water treatment plants, and manufacturing facilities to detect imbalance, misalignment, and bearing wear.
Fan and Blower Protection:
Used to monitor the overall vibration of cooling tower fans, industrial exhaust fans, and forced draft blowers, providing early warning of mechanical failure.
General Rotating Machinery:
Provides a simple and reliable vibration signal for compressors, gearboxes, and mixers that are integrated into a plant's existing control and alarm system.
Predictive Maintenance Programs:
Serves as a foundational sensor for a PdM strategy, enabling trend analysis and maintenance scheduling based on actual machine condition rather than fixed time intervals.
Integration into Control Systems:
Its standard 4-20 mA output allows for easy connection to PLCs and DCS, enabling real-time alarm (Alert) and shutdown (Danger) functions to protect valuable equipment.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
