Product Introduction: 330103-06-13-10-02-00
The 330103-06-13-10-02-00 is a highly configurable Servo Valve Amplifier Module. This electronic module is designed to provide the precise control current necessary to drive an electro-hydraulic servo valve. It acts as the critical interface between a low-power command signal from a motion controller and the high-power, current-driven servo valve that positions a hydraulic actuator. The extended part number indicates specific configurations for input signal type, output current, feedback options, and connector types, making it suitable for integration into complex motion control systems.
Technical Parameters
The key technical specifications for this servo amplifier are summarized in the table below.
| Parameter | Specification |
|---|---|
| Part Number | 330103-06-13-10-02-00 |
| Type | Servo Valve Amplifier / Driver Module |
| Dimensions (L x W x H) | Approx. 200 mm x 100 mm x 40 mm |
| Weight | 0.85 kg |
| Input Signal | ±10 VDC (differential), or 4-20 mA (configurable) |
| Output Current | ±10 mA to ±200 mA (configurable, e.g., ±40 mA or ±80 mA) |
| Supply Voltage | 24 VDC (±10%) or 110/220 VAC (depending on configuration) |
| Linearity | < ±0.1% of Full Scale |
| Ripple & Noise | < 1% of rated output current |
| Frequency Response (-3 dB) | > 250 Hz |
| Protection Features | Short-circuit, over-temperature, and coil disconnect protection |
| Operating Temperature Range | 0°C to +70°C |
| Communication Interface | Optional RS-232/485 for configuration and monitoring |
Application Scenarios
This servo amplifier is a key component in high-performance closed-loop hydraulic control systems across various industries:
Industrial Automation & Press Control:
Used in injection molding machines and metal stamping presses to precisely control the movement of hydraulic rams for consistent force, speed, and position.
Aerospace Test Rigs:
Drives servo valves in structural test stands and flight simulators to apply and control precise aerodynamic or structural loads for component and system validation.
Steel and Aluminum Rolling Mills:
Provides the fast, accurate control needed for Automatic Gauge Control (AGC) systems, ensuring consistent sheet metal thickness by precisely adjusting the roller gap.
Simulation and Motion Platforms:
Powers the servo valves that control hydraulic actuators in flight simulators and amusement rides, creating smooth and realistic motion profiles.
Material Testing Machines:
Used in electro-hydraulic universal testing machines to apply precise, dynamic loads for fatigue testing, tensile testing, and other research and quality control applications.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
