Product Introduction: 3500/05-01-02
The 3500/05-01-02 is a Rack Interface Module (RIM) for the Bently Nevada 3500 Machinery Protection System. This module is a critical communication and system management component within the 3500 rack. It does not monitor machinery directly but acts as the central nervous system, providing the communication link between the monitoring modules in the rack and an external diagnostic software system, such as System 1*. It also provides buffered analog outputs and manages the rack's configuration and overall health.
Technical Parameters
The key technical specifications for the 3500/05-01-02 module are summarized in the table below.
| Parameter | Specification |
|---|---|
| Part Number | 3500/05-01-02 |
| System | Bently Nevada 3500 |
| Module Type | Rack Interface Module (RIM) |
| Dimensions (H x W x D) | 190 mm x 55 mm x 120 mm (Standard 3500 Rack Slot) |
| Weight | 0.50 kg |
| Primary Function | Gateway for external communication and rack management |
| Key Communication Port | RS-232 / RS-485 for connection to monitoring software |
| Keyphasor® Signal | Conditions and distributes the Keyphasor signal to all monitor modules in the rack |
| Buffered Outputs | Provides analog outputs for trend recording |
| Power Supply | Powered by the 3500 Rack; +24 VDC from the rack's power supply |
| Operating Temperature | -20°C to +65°C |
Application Scenarios
The 3500/05 RIM is an essential module in any 3500 system that requires data integration, diagnostics, and advanced monitoring capabilities.
Plant-Wide Condition Monitoring:
Serves as the primary data gateway, streaming machinery data from the entire 3500 rack to asset management software (e.g., System 1*) for plant-wide monitoring, diagnostics, and historical analysis.
Data Acquisition and Trending:
Provides buffered analog outputs to connect to traditional chart recorders or plant Distributed Control Systems (DCS) for long-term trend recording of vibration and other parameters.
System Configuration and Diagnostics:
Allows engineers to configure the entire 3500 rack (setpoints, alarms, etc.) and to diagnose the health of the monitoring system itself via a connected laptop.
Critical Machinery Trains:
Essential for the monitoring of critical assets like turbo-trains in refineries or power generation, where integrating vibration, temperature, and speed data into a central platform is necessary for reliable operation.
Turbine Supervisory Systems:
A mandatory component in a 3500 rack used for protecting and monitoring steam and gas turbines, as it enables the sophisticated diagnostics needed for these high-value assets.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
