Product Introduction: 177230-02-01-05
The 177230-02-01-05 is a Signal Conditioner or Isolator Module designed for industrial process control and instrumentation systems. This module acts as an interface between field sensors and control systems, performing critical functions such as isolating, converting, amplifying, and linearizing analog signals. It is commonly used to accept a signal from a transducer (like a temperature sensor or pressure transmitter) and convert it into a robust, noise-free standard output signal (like 4-20 mA) for the Programmable Logic Controller (PLC) or Distributed Control System (DCS). The part number suffix typically denotes specific input/output configuration and power supply requirements.
Technical Parameters
The key technical specifications for the 177230-02-01-05 module are summarized in the table below.
| Parameter | Specification |
|---|---|
| Part Number | 177230-02-01-05 |
| Type | Analog Signal Conditioner / Isolator |
| Mounting | DIN Rail Mount |
| Dimensions (H x W x D) | Approx. 110 mm x 22.5 mm x 115 mm |
| Weight | 0.15 kg |
| Input Signal | Configurable (e.g., RTD, Thermocouple, 0-10V, 4-20 mA) |
| Output Signal | 4-20 mA (isolated) |
| Power Supply | 24 VDC (typical) |
| Isolation | 1500 VAC (input to output to power) |
| Accuracy | ±0.1% of span |
| Operating Temperature | -20°C to +70°C |
| Relative Humidity | 5% to 95% non-condensing |
Application Scenarios
This signal conditioner is a versatile component used across various industries to ensure signal integrity and system compatibility.
Process Industry (Chemical, Petrochemical):
Isolates 4-20 mA signals from pressure and flow transmitters in hazardous areas, preventing ground loops and protecting the control system from voltage surges.
Temperature Monitoring Systems:
Converts signals from RTD (Pt100) or thermocouple (Type J, K) sensors into a standardized 4-20 mA output for accurate temperature monitoring in HVAC systems and industrial ovens.
Motor Control Centers (MCCs):
Conditions feedback signals from motor-driven equipment, such as pump speed or actuator position, for reliable input to the PLC.
Water and Wastewater Treatment:
Interfaces with various analog sensors measuring pH, level, or conductivity, providing a clean and isolated signal to the SCADA system for process control.
Manufacturing Automation:
Used on production lines to integrate analog sensors from different vendors into a unified control system, ensuring signal compatibility and noise immunity.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
