Introduction
The 3500/42 140471-01 + 140734-02 represents a configurable monitoring channel assembly within the Bently Nevada 3500 System. The combination specifies a 3500/42M Proximitor® Power Supply and Buffer Module (140471-01) paired with a 3500/42M Monitor Module (140734-02). This assembly is a fundamental building block for monitoring radial vibration and rotor speed (Keyphasor®) on rotating machinery using non-contact eddy-current proximity probes. The 140471-01 module powers the probes and buffers their raw signals, which are then processed by the 140734-02 module to provide continuous, real-time measurements and generate alarm signals.
Key Parameters
The following table summarizes the key technical and physical specifications for this module assembly.
| Parameter Category | Specification |
|---|---|
| Model / Assembly | 3500/42M Channel Assembly (140471-01 + 140734-02) |
| Primary Function | Radial Vibration & Speed (Keyphasor) Monitoring for machinery equipped with eddy-current probes. |
| Input Compatibility | Accepts signals from standard Bently Nevada 5 mm or 8 mm eddy-current proximity probes. |
| Power Supply (to Probes) | Provides -24 VDC regulated power for up to four proximity probes (via 140471-01). |
| System Power | Powered from the 3500 rack backplane (+24 VDC). |
| Dynamic Signal Range | Typically ±10 VDC for vibration and Keyphasor signals. |
| Operating Temperature | -30°C to +65°C (standard for 3500 series). |
| Dimensions (per Module, H x W x D) | Standard 3500 Series Module Size: 190 mm (H) x 50 mm (W) x 170 mm (D) Note: This assembly requires two adjacent slots in a 3500 rack. |
| Weight (Total Assembly) | Approx. 1.1 kg - 1.4 kg (combined weight of both modules). |
| Mounting | Modules are installed in adjacent slots of a 3500 rack or frame. |
*Note: Specifications such as gap voltage, scale factors, and alarm setpoint ranges are configurable via software. Always refer to the official *Bently Nevada 3500/42M Framework Configuration and Installation Guide* for the exact part numbers for critical design.*
Application Scenarios
This specific assembly is the industry-standard solution for monitoring the mechanical health of rotating shafts in critical machinery across numerous sectors:
Steam & Gas Turbine Monitoring:
Primary Application: Continuously monitors radial shaft vibration and provides a once-per-revolution Keyphasor® signal for phase reference on turbine-generator sets. This is essential for protecting against unbalance, misalignment, and shaft instabilities.
Centrifugal Compressor Protection:
In oil & gas and chemical plants, this assembly safeguards critical pipeline, refrigeration, and process compressors by detecting vibration changes that indicate aerodynamic instability, bearing wear, or rotor rubs.
Large Motor and Pump Surveillance:
Used on high-power motors, boiler feed pumps, and cooling water pumps to detect developing faults like imbalance, bearing degradation, or coupling issues before they lead to unexpected downtime.
Hydroelectric and Wind Turbine Drivetrains:
Monitors the main generator and gearbox shafts to ensure reliable operation and schedule maintenance based on actual condition rather than fixed intervals.
Heavy-Duty Fans and Blowers:
Protects large induced draft (ID) and forced draft (FD) fans in power generation and industrial processes, where imbalance or fouling can cause excessive vibration and catastrophic failure.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
