Introduction:
The 3500/42M 138700-01 is a Proximitor® Seismic Transmitter module, a critical component within the Bently Nevada 3500 series monitoring system. This module is specifically designed to interface with seismic transducers (velocity sensors) to continuously monitor the absolute casing or structure vibration of rotating machinery. It conditions the transducer signal, converts it into a proportional 4-20 mA output for remote monitoring (DCS/PLC), and provides buffered sensor signals and dedicated alarm channels for local protection. The "-01" suffix denotes a specific hardware or firmware revision.
Parameters:
The following table details the key technical and physical specifications of this monitoring module.
| Parameter Category | Specification |
|---|---|
| Model / Part Number | 3500/42M 138700-01 |
| Module Type | Seismic (Velocity) Transmitter / Monitor |
| Compatible Transducer | Velocity Seismoprobe® (e.g., 330500, 330525) or equivalent (Typically 100 mV/in/s sensitivity) |
| Input Signal | Raw velocity signal from seismic transducer |
| Dynamic Range | 0 to 2.0 in/s (0 to 50.8 mm/s) peak (typical full scale) |
| Frequency Response | 4.5 Hz to 1000 Hz (±3 dB) |
| Primary Output | 4-20 mA, linearly proportional to measured velocity (user-scalable) |
| Buffered Outputs | Two: Raw Sensor Signal & Demodulated Signal (for analysis) |
| Alarm Channels | Two independent alarms (Alert & Danger), field-configurable setpoints and delays |
| Power Supply | Powered by the 3500 rack (typically +15 Vdc to +24 Vdc from backplane) |
| Operating Temperature | -20°C to +65°C (-4°F to +149°F) |
| Module Dimensions (H x W x D) | Standard 3500 frame module: Approx. 190 mm x 54 mm x 200 mm (7.5 in x 2.1 in x 7.9 in) |
| Weight (Module Only) | Approx. 0.45 kg (1.0 lb) |
| Mounting | Slides into a dedicated slot in a 3500 monitoring rack |
| Compliance | CE, ATEX / IECEx options may be available (dependent on configuration) |
Application Scenarios:
The 3500/42M module is essential for predictive maintenance and protection of industrial machinery where overall structural vibration is a key health indicator.
Electric Motors & Generators: Monitors bearing housing and stator frame vibration to detect imbalance, misalignment, or loose components on large AC/DC motors and power generators.
Pumps & Fans: Used on critical cooling water pumps, boiler feed pumps, and large induced draft (ID) / forced draft (FD) fans to detect cavitation, aerodynamic instability, or mechanical wear.
Turbines (Steam & Gas): Monitors the support structure and casing vibration, providing vital data for condition assessment and preventing catastrophic failures.
Compressors: Applied to reciprocating and centrifugal compressor skids to monitor overall vibration levels, crucial for detecting valve issues, pulsation, or foundation problems.
Conveyors & Gearboxes: Monitors large gearboxes and the structure of critical conveyor systems in mining and material handling to prevent unplanned downtime.
Paper & Steel Mill Machinery: Protects large rolling mills, calenders, and dryers by monitoring the structural vibration of these massive machines.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
