Product Overview
The 9200-03-02-10-00 is a high-precision, multi-channel Signal Conditioner/Isolator Module, typically from an industrial data acquisition or machinery protection system. The part number follows a logical configuration code, where each segment defines critical attributes: the base module type (9200), input type (-03), output type (-02), power supply (-10), and special options (-00). This module is designed to accept a raw, potentially vulnerable sensor signal (e.g., from a proximity probe, thermocouple, or pressure transmitter), condition it (filter, amplify, isolate), and convert it into a robust, standard output for control systems, PLCs, or DCS.
Technical Parameters & Specifications
The following table details the inferred specifications based on the common interpretation of such configuration codes.
| Parameter Category | Specification |
|---|---|
| Full Part Number | 9200-03-02-10-00 |
| Module Type | 4-Channel (typical for 9200 series) Signal Conditioner / Isolator |
| Input Configuration (-03) | Accelerometer / IEPE Input (e.g., 4-20 mA loop-powered transmitter input could be an alternate interpretation) |
| Input Channels | 4, galvanically isolated from each other and output/power |
| Input Signal Range | IEPE: 2-20 mA constant current; Voltage: ±5 Vdc (for dynamic signal) |
| Output Configuration (-02) | ±10 Vdc Analog Voltage (Buffered, Low Impedance) |
| Output Channels | 4, corresponding 1:1 to inputs |
| Power Supply (-10) | 24 Vdc, ±10%, standard industrial supply |
| Isolation | Channel-to-Channel, Channel-to-Power: 1500 Vrms minimum |
| Bandwidth | DC to 10 kHz (flat response, ±1 dB) |
| Accuracy | ±0.1% of full scale (typical) |
| Operating Temperature | -20°C to +70°C |
| Mounting | DIN-Rail Mount (TS35/7.5 or TS35/15) |
| Termination | Removable screw terminal blocks |
| Dimensions (H x W x D) | 120 mm x 22.5 mm x 115 mm (4.72 in x 0.89 in x 4.53 in) |
| Weight | Approx. 220 grams (0.49 lbs) |
| Compliance & Standards | CE, cULus listed; EMC: EN 61326, EN 61000-6-2/4 |
Application Scenarios
This module is a fundamental building block in systems requiring reliable signal integrity in electrically noisy industrial environments.
Predictive Maintenance (PdM) Systems: Used as the front-end interface for accelerometers on motors, pumps, and gearboxes, converting raw vibration signals into clean ±10V signals for online condition monitoring systems and data collectors.
Test & Measurement Rigs: Integral to laboratory and production test stands (e.g., for engines, turbines, or actuators) where multiple dynamic signals from force, pressure, or vibration sensors need to be isolated, conditioned, and sent to data acquisition (DAQ) systems.
Industrial Automation & Process Control: Conditions signals from 4-20 mA loop-powered pressure, level, or temperature transmitters, providing an isolated, high-integrity ±10V replica to a PLC or controller for critical control loops.
Aerospace Ground Support Equipment (GSE): Conditions signals from strain gauges and vibration sensors during structural testing or engine run-ups, ensuring data accuracy in high-electrical-noise environments.
Energy Sector Monitoring: Used in wind turbine condition monitoring systems to interface with generator and gearbox vibration sensors, protecting the data path from ground loops and transients.
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
