9200-01-05-10-00 Seismic Transmitter
Description:
The part number 9200-01-05-10-00 refers to a Seismic Vibration Transmitter from the Bently Nevada 9200 Series. This device is a robust, 4-20 mA output transmitter designed for continuous monitoring of casing or structural vibration (velocity) on rotating machinery.
It is an integrated device that combines a velocity sensor (seismometer) and a signal conditioner into a single, ruggedized package. The transmitter measures the absolute vibration velocity of the surface on which it is mounted and converts this mechanical motion into a standardized 4-20 mA analog electronic signal. This signal is directly proportional to the vibration level and can be easily sent to a PLC, DCS, or a basic indicator for machinery protection and monitoring.
Parameters & Specifications
The following table details the key parameters for this specific configuration based on the standard Bently Nevada 9200 part numbering scheme.
| Parameter | Specification / Interpretation |
|---|---|
| Part Number | 9200-01-05-10-00 |
| Device Type | Seismic Vibration Transmitter (4-20 mA) |
| Measured Parameter | Vibration Velocity |
| Sensing Technology | Integrated Seismic Velocity Sensor (Coil & Magnet) |
| Output Signal | Two-wire, 4-20 mA analog output, linearly proportional to vibration velocity. |
| Power Supply | Typically 12 to 30 VDC loop power (standard for two-wire 4-20 mA devices). |
| Frequency Range | -01- = 4.5 Hz to 1000 Hz (Standard Velocity Range) |
| Dynamic Range | -05- = 0 to 25.4 mm/s (0 to 1.0 in/s) True Peak Velocity (Standard Range) |
| Electrical Connection | -10- = Conduit connection with a 1/2" NPT conduit entry. |
| Mechanical Mounting | -00 = Standard mounting (e.g., a single 1/4"-28 UNF mounting hole on the base). |
| Sensitivity / Scale Factor | (20 mA - 4 mA) / Range = 16 mA / 25.4 mm/s ≈ 0.63 mA/(mm/s) |
| Operating Temperature | Typically -40°C to +85°C (-40°F to +185°F) |
| Housing Material | Typically stainless steel or ruggedized aluminum for industrial environments. |
| Typical Dimensions | Approx. 80 mm x 80 mm x 60 mm (3.15 in x 3.15 in x 2.36 in) - varies by housing. |
| Typical Weight | Approx. 0.9 kg (2.0 lbs) |
Important Note: The interpretations for the part number suffixes are based on common Bently Nevada 9200 series configurations. For absolute certainty regarding the frequency range, dynamic range, and mechanical details for this exact part number, consulting the official Baker Hughes Bently Nevada 9200 Series Datasheet is essential.
Application Scenarios
The 9200 Series Vibration Transmitter is designed for continuous, reliable monitoring of overall vibration on a wide range of industrial equipment. Its simple 4-20 mA output makes it ideal for integration into basic control and monitoring systems.
Casing Vibration Monitoring on Pumps, Fans, and Motors: The most common application. It provides a direct measurement of the machine's overall mechanical health, protecting against failures caused by:
Imbalance
Misalignment
Bearing Wear (in later stages)
Structural Looseness
Non-Critical Machine Protection: Used as a cost-effective protection solution for less critical assets where a full machinery monitoring system is not justified. The 4-20 mA signal can be wired directly to a PLC to trigger an alarm or shutdown if vibration levels become excessive.
Continuous Monitoring of Auxiliary Equipment: Ideal for motors, blowers, compressors, and other equipment that is important for the process but may not require the advanced diagnostics of a proximity probe system.
Plant-Wide Vibration Monitoring Programs: Its rugged design and simple installation make it suitable for deploying across a facility to monitor hundreds of assets, providing a basic level of protection and enabling condition-based maintenance.
API 670 Compliance Support: For machinery where the API 670 standard mandates casing vibration monitoring, these transmitters provide a compliant solution.
Typical Machinery:
Centrifugal & Axial Pumps
Induced Draft (ID) & Forced Draft (FD) Fans
Electric Motors (medium to large horsepower)
Blowers and Compressors (non-critical)
Gearboxes
Conveyors and other rotating equipment
Global direct procurement guarantee
All products are purchased directly from overseas original manufacturers or authorized channels, 100% guaranteed genuine quality, sufficient spot inventory, and comprehensive model coverage
Quality Commitment
Each product has been tested by our technicians, providing 12-month long warranty, worry-free after-sales
Flexible procurement plan
- Bulk order enjoys Friendship discount (2 pieces or more can be applied)
- Long-term cooperative customers can apply for priority supply
Full service support
7×24 hours technical consultation, from selection guidance to installation and commissioning to provide full life cycle service (paid)
Why do so many customers choose us?
On the basis of the same quality, we provide:
- More competitive price system
- Faster logistics response
- More complete technical support (free product technical documentation)
Your trust is the driving force for our continuous progress, submit your requirements immediately to get exclusive quotes
